Low water pressure in the domestic water supply can pose a number of challenges for the homeowner. Right from making it very much inconvenient to carry out the ordinary household chores like showering or doing the dishes. While it may be necessary to call a technician to identify the fault in the system, you may quite be surprised to discover that the problem can even be fixed by yourself if you get around to checking it. Here are the possible culprits for low water pressure that you might need to check in order to restore it to normal. Determine the best information about condensate return pump
The Water Meter
The water metering mechanism should be the first place to check for faults. There could either be a blockage or simply a leak that results in the meter not running at its full capacity. A simple check on the meter would indicate the source of the problem which can then be handled by the water company's technician.
The Main Shut Off Valve
This may also be a contributing factor to low water pressure in your home. It's normally located along the street branching from the main pipe that supplies your estate. It is not uncommon to discover that it may have been slightly turned off during the last check when the technicians were working on the main pipeline. Turning it all the way on may be the only thing you need to do to solve the problem
Pressure Regulating Mechanism
Every homeowner installs their own pressure regulator to ensure that the water doesn't come in with too much force. Too much pressure is normally dangerous since it can lead to the destruction of the appliances and fixtures along the water system. However, the regulator could have malfunctioned and in need of replacement or repair. Once this is done, normal water pressure is restored. Verify the information that you've read about water pressure booster systems
is very interesting and important.
Faucets and Shower Heads
Sometimes the taps, faucets and other fixtures at the end of the water delivery system may be the ones in need of replacement to boost water pressure in the system. There could be blockages in these fixtures that could result in low water pressure. These should be checked to eliminate the possibility that they are the cause of the problem.
The Piping System
Accumulation of dirt and debris in the pipes over a period could also cause low pressure, especially if you used galvanized pipes when setting up the system. If this is the case, you will need to have them replaced, even if it may prove to be a bit costly. But once replaced, you can enjoy the right water pressure that will enable you to carry out your household chores without much hassle. Seek more info about air pump https://en.wikipedia.org/wiki/Air_pump